Detail SPRIANO SET 46-Reative And Absolute Pressure
Series SET46 transmitters, complete with diaphragm in AISI 316, measure relative or absolute pressure in measuring spans between 0, 035 and 31, 5 bar. The pressure measuring element is a piezoresistive sensor. It is possible to choose between sensors to satisfy the process conditions.
The sensor, protected from the process fluid by diaphragm, generates a signal corresponding to the actual pressure and is completed with a PTC thermistor which also transmits the temperature of the the measuring cell to the electronic system. On the basis of these two values and of the configured parameters the electronic system generates a standard output signal ( 4 to 20 mA, two wires system) and displays all the necessary data on the LCD display. The operating parameters can be changed by means of the two push buttons that are below the LCD display.
Among the relevant characteristics of this microprocessor based transmitter, are the following:
- wide rangeability for the measuring span ( abt. 1 to 10)
- automatic temperature compensation in the measuring cell.
- complete programmability
http: / / www.spriano.it/ wp/ en/ wp-content/ uploads/ 2010/ 06/ SET4 6-MI046-E-ed-10_ 03.pdf
Instruction Manual :
http: / / www.spriano.it/ wp/ en/ wp-content/ uploads/ 2011/ 03/ ET-46A.pdf
PRODUCT SHEET :
http: / / www.spriano.it/ wp/ en/ wp-content/ uploads/ 2011/ 03/ ET-46A.pdf
Tampilkan Lebih Banyak