Electric sealer FA-200-10 W
Seal width: 10 mm
Seal length: 200 mm
Sealing method: top and bottom heating
Heating time :0.1-1.6 seconds
Cooling time: ~ 5 seconds
For film thickness: 0.4 mm or less total
Power supply: AC100V, 1450 W
Weight: 17 kg
Manufacturer: Fuji impulse
Machine dimension: 260 mm width x 580 mm deep x 360 mm high
* Optional available replacing the printer ( inside the printing type FEP-N2 )
Only Fuji impulse electric sealer FA push switch raises the sealing pressure by powerful electromagnets, can seal automatically. Do the sealing time control (heating and cooling) in the micro-computer control, so stable, regardless of the worker unlike manual sealers seal.
■ features
Seal up electric, so very easy to work. Compared to manual sealer such as treadle sealer greatly reduces the fatigue of workers.
Also, because it is made very firm and stable long term, can be used
■ Teflon sheet
Teflon sheet covering the heater line of sealer plays an important role.
Teflon sheet is a sheet with a heat-resistant made of fluorocarbon resin. Above the heater line of sealer is the electrical insulation and separation bag for net Teflon sheet.
Is very heat-resistant Teflon sheet, heat seal are repeated thousands of times, and will be charred black heater wires and parts are in direct contact. Teflon sheet is torn and keep it intact, and causing the rupture of the heater wires.
So, when dirty or burned some Teflon to replace (or move) the.
Teflon volume taking pole at the back side of the welded part. Loosen screws holding up the holding volume of rod and front has been caught Teflon Teflon volume taking stick in, so the Teflon please pull a little on top. Teflon bordering this heater line has a new, clean sealing.
Do sealing work and seal or sealer malfunction cause remains the Teflon sheet singed or burnt and torn. To use sealer Teflon sheet please take a look at use in good condition.
■ wear and tear parts and repairs
Manufacturer's warranty of the product is shipped after 6 months. ( Sales store management, and thus, does not come with warranty. ) during the warranty period the defect occurs immediately contact us contact please. Symptoms and make appropriate responses will be happy.
Machinery to continue to use, and requires replacement consumable parts, such as heater wire, Teflon, and silicone rubber. About the wear and tear parts is basic stuff first comes to the machine body.
Contact :
PT DWI SUBUR MAKMUR
JL. Kayu Jati IV No 25
Jakarta Timur
Telp : 021 47869642, 47881968, 4759101
Email ; dsm@indo.net.id