KENCO KMR & KHR Reflex level Gauges

KMR & KHR Reflex Level Gauges and Valves = = = = = = = = = = = = = = = = = = = = = = = = = = = KENCO Flat Glass Gauges are used where direct visual observation of process fluids is required. These gauges are suitable for a wide range of applications with pressures up to 4000psig at 100oF, and temperatures up to 750oF at 2300psig. KENCO gauges are available in a wide variety of construction materials, connections and other options to meet most specifications. REFLEX STYLE LEVEL GAUGE Reflex gauges have a single piece of glass, mounted on one side of the chamber. This piece of glass is flat on the outside, and has a series of prisms on the inside, facing the process fluid. When light strikes the portion of the glass covered by a liquid, the light is reflected from the back of the chamber. This area appears “ black” . When light strikes the glass where no liquid is present, the prisms reflect the light directly out of the gauge. This area appears “ silvery” . Reflex gauges provide an excellent way to measure clear, or difficult to see fluids. The “ silvery” / ” black” interface is easy to see from several feet away. WHY USE FLAT GLASS GAUGES = = = = = = = = = = = = = = = = = = = = = Flat Glass Gauges have been in use for over 100 years. They give you the ability to directly view the process fluid under temperature/ pressure conditions that would render most other level technologies useless. Their construction is very robust, and reliable. They define the term “ simple to use” . After installation, the only tool you will need is your eyes. Flat Glass Gauges are relatively inexpensive as compared to most other level technologies. Other Features They do not need electrical power to operate. This can be a great advantage in the case of a power outage. Simple to install – no calibration is necessary. Can be used as a reference to check, or calibrate, other level technologies. Pressure rating from vacuum to 4000psig. Temperature rating from -425oF to 750oF Not affected by the chemical or electrical properties of the process liquid. Specific gravity, dielectric, conductivity, surface turbulence, vapor, foam, etc. no longer needs to be considered. Contact us = = = = = = PT.DWI SUBUR MAKMUR JL: KAYU JATI IV No 25 Jakarta 13220 Telp : 021 4786 9642, 4788 1968, 475 9101 fax : 021 471 9009 Email : dsm@ indo.net.id http: / / www.dwisuma.indonetwork.co.id